Declaration of Conformity
We, Harman Consumer Group International
2, route de Tours
72500 Château du Loir
France
declare in own responsibility that the product described in this owner’s
manual is in compliance with technical standards:
EN 61000-6-3:2001
EN 61000-6-1:2001
Klaus Lebherz
Harman Consumer Group International
Château du Loir, France 6/06
JBL, Incorporated
250 Crossways Park Drive, Woodbury, NY 11797 USA
516.255.4JBL (4525) (USA only) www.jbl.com
© 2006 Harman International Industries, Incorporated. All rights reserved.
JBL and Harman International are trademarks of Harman International Industries,
Incorporated, registered in the United States and/or other countries. I-Mount and
Starfish are trademarks of Harman International Industries, Incorporated.
Part No. CS2165COM6/06
www.jbl.com
CS2165C
Type
165mm Two-way
component system
Power Handling
45W RMS,
135W Peak
Sensitivity (2.83V/1m)
91dB
Frequency
55Hz – 20kHz
Response
Impedance
4 Ohms
Mounting Depth
2-3/8" (61mm)
Cutout Diameter
5-11/16" (145mm)
Overall Diameter
6-9/16" (167mm)
GENERAL CARE
The loudspeaker grilles may be cleaned with a damp cloth. Do not use any cleaners
or solvents on the grilles or the speaker cones.
This product is designed for mobile applications and is not intended for
connection to the mains.
A valid serial number is required for warranty coverage.
Features, specifications and appearance are subject to change without notice.
Not all models are available in all markets.
CONNECTIONS
Connect the tweeter using the supplied
wire with inline crossover to the terminals
on the woofer. Note that there are two
positive and two negative terminals on
the woofer. Connect the unused positive
and negative terminals to your amplifier‘s
output leads, observing proper polarity.
You must use the supplied inline crossover.
Failure to do so may damage the tweeter.
Figure 5.
Wiring connections
SPECIFICATIONS
To Amplifier
