JBL CRISTALPROFI i60 greenline, Manual

Page: 26 / 200

22
connections clip properly into place (1). Return the filter to its original place in the aquarium and install any accessories as
previously.
Plug the filter to the power supply.
Regulate the flow to the desired rate.
What to do if…?
The pump head or module cannot be correctly fitted
Cause Solution
Dirt (sand) in snap fastenings Clean snap fastenings.
Filter does not run or no water flows out
Cause Solution
No power supplied Plug in the mains plug, making sure to check the socket for
the right voltage
Impeller missing or blocked by gravel, wormgear casing or
rotor faulty
Clean impeller casing, fit intact impeller
Filter capacity greatly reduced
Cause Solution
Flow regulator set incorrectly Check position of regulator and correct
Suction slit blocked Clean suction slit
Filter material heavily soiled Clean filter material