JBL CRISTALPROFI i100 greenline, Manual

Page: 22 / 200

18
Technical Data CP i60 CP i80 CP i100 CP i200
Max. pump capacity [l/h] 420 420 720 720
For aquariums [l] 40-80 60-100 90-160 130-200
L x B x H ( mm)* 85x85x155 85x85x225 85x85x295 85x85x365
Filter module [pc.] 1 2 3 4
Filter material [l] 0.25 0.5 0.75 1
Voltage [V]/Frequency [Hz] AC230, 50 AC230, 50 AC230, 50 AC230, 50
Power input [W] 4 4 8 8
Energy savings compared to the previous model
W 7 7 3 3
kWh per year 61 61 26.25 26.25
€ per year** 12.2 12.2 5.25 5.25
€ in guarantee period** 48.8 48.8 21 21
*including flow regulator
** at 0.20 € / kWh
Installation

Unpacking and preparation
Carefully remove the filter and the separate accessories from the packaging and check that nothing is missing. In the event
that anything is missing or damaged, please contact your specialist retailer.
Insert the enclosed large suction cups into the side openings of the pump head by turning and pressing lightly. Make sure
the central pin fits into the suction cup before locking in place. Pull the pump head off the filter module for model i60 and
separate the filter modules for models i80, i100 and i200 in the same manner. Remove the foam cartridges without the central
collection pipe from the modules. Rinse the cartridges under lukewarm tap water.
Push the foam cartridge(s) back onto the collecting pipe in the respective module.