Systems with
SURFACE-MOUNT
(on-wall)
Satellite Speakers
Application Note:
This combination produces a great full-range sound with flat
frequency response, usable from 38 Hz to 22 kHz.
Do NOT use a different quantity or model of satellite
speaker .
Changing to a different, higher sensitivity, satellite
model unbalances the subwoofer/satellite sensitivity balance
(see “Consideration” notes above)
, resulting in the mids and
highs being overly dominant. Similarly, changing to fewer
Control 23 speakers results in a different load impedance
resulting in incorrect crossover point. This system works
properly only with 4 pcs Control 23 speakers – they were
designed to be used together.
System #1: CCS6000 System
4 pcs Control 23 with Control SB-2
Application
Light volume ambient music in medium size spaces where
four speakers are needed.
Max Continuous Average SPL
(at 20 feet)
87 dB (with peaks of 97 dB)
Stereo/Mono Capability
Works best as a stereo system with separate input for left and
right inputs.
Connection
Connect 2 pcs of Control 23 to each satellite
output (Left and Right). Do NOT connect all
4 satellite speakers to a single satellite output.
Satellite
Outputs
Left
Right
CCS6000 System
(Stereo Only)
SPL
(at 20 Feet):
84 dB Continuous (peaks of 94 dB)
From
Power
Amp
Left
Right
Input
Terminals
Control SB-2
Control 23
Control 23
Control 23
Control 23
Stereo System Connection Note
Ensure that the polarity hookup of the left and right inputs is correct.
If one of the inputs is connected backwards (out of polarity), the sub-
woofer will not produce much (if any) bass
.
6
7
Summary of Contents for Control SB210
Page 2: ......
