background image

2

Thank you for purchasing JBL Control Contractor ceiling loudspeakers.

Read through this manual to familiarize yourself with the features, applications and
precautions before you use these products.

Product Descriptions

The JBL Control Contractor ceiling loudspeakers utilize innovative design and
materials to provide premium level performance from compact in-ceiling speakers.

CONTROL 24C & 24CT – Most compact of the JBL ceiling speakers, the Control
24C contains a coaxially mounted 4” woofer and ¾” titanium-coated tweeter,
providing high-fidelity full-range sound over an extremely wide coverage area.  The
optional Control 24CT includes a multi-tap transformer for 70V or 100V systems.

CONTROL 26C & 26CT – The Control 26C is a powerhouse ceiling speaker
containing a coaxially mounted 6.5” woofer and ¾” titanium-coated tweeter, able to
deliver maximum sound level over a wide coverage area.   The optional Control 26CT
includes a multitap transformer for a 70V or 100V line distribution system.

CONTROL 19CS & 19CST Subwoofer – The unique Nested Chamber

 design and

Linear Dynamics

 port allows powerful low-frequency reinforcement from a

compact in-ceiling enclosure.  The Control 19CS is an ideal addition to any system,
resulting in full-fidelity high level sound.  The optional Control 19CST includes a
special subwoofer-band transformer for use on 70V or 100V line distribution systems.

Summary of Contents for CONTROL MONITOR LOUDSPEAKERS




















Reviews: