6
BooStINg thE BASS
Press the remote’s Bass Boost button to enhance low-frequency
performance, resulting in bass with more impact, which you may
prefer while watching movies or listening to music. There is no harm in
experimenting with this control. Pressing the Bass Boost button again
will return the soundbar’s normal low-frequency performance.
BASS
Bass Boost
Button
LEArNINg Your tV rEMotE’S VoLuME ANd
MutE CoMMANdS
You can program the soundbar so it will respond to your TV remote’s
volume up, volume down and mute commands. This will let you control
both the soundbar and your TV with a single remote. Before you begin
to program the soundbar, have your TV remote in hand.
1. Press and hold the soundbar’s Surround button until the button
begins flashing amber.
Press and Hold Until
Button Flashes Amber
2. Hold your TV’s remote approximately 12” (30cm) from the front of the
soundbar and aim the remote directly at the soundbar:
TV
Remote
30cm
(12")
• Press the TV remote’s volume up button while pressing and holding
the soundbar’s button. If the programming was successful
the soundbar’s Surround button will change from amber to solid
white for one second, then will return to flashing amber.
A) Hold Down Soundbar’s
Button
B) Press TV
Remote’s
Volume Up
Button
• Press the TV remote’s volume down button while pressing and
holding the soundbar’s Volume – button. If the programming was
successful the soundbar’s Surround button will change from amber
to solid white for one second, then will return to flashing amber.
A) Hold Down Soundbar’s
Volume – Button
B) Press TV
Remote’s
Volume
Down Button
• Press the TV remote’s mute button while pressing and holding the
soundbar’s and Volume – buttons at the same time. If the
programming was successful the soundbar’s Surround button will
change from amber to solid white for one second, then will return to
flashing amber.
A) Hold Down Soundbar’s
and – Button
B) Press TV
Remote’s
Mute
Button
3. When you’re finished, press and hold the soundbar’s Surround
button until the button stops flashing amber.
The soundbar will now respond to your TV remote’s volume and mute
commands.
SPECIFICAtIoNS
CINEMA SB100 POWERED SOUNDBAR SPEAkER
Low-frequency transducer:
One 3" (77mm) cone per channel
High-frequency transducer:
One 1-1/2" (38mm) tweeter per channel
Amplifier power:
30 watts peak per channel
Frequency response:
80Hz – 18kHz (-6dB)
Power requirement:
100V – 240V, 50Hz/60Hz, 30W
Power consumption:
<0.5W (standby); 30W (maximum)
Dimensions (H x W x D):
4-1/4" x 31-7/8" x 3-5/8"
(108mm x 810mm x 92mm)
Weight (shipping):
8.4 lb (3.8kg)
