JBL
BRX
300
SERIES
8
SYSTEM DEPLOYMENT GUIDE
NOTE: BRX Speakers used with other Amplification and DSP will VOID the WARRANTY of the system.
The below image shows the connection diagram for the BRX308-LA Tops from the Amplifier and DSP Module.
Each output on the Power Amplifier module can drive up to 2 x BRX308-LA Tops.
The system can be driven in 2 Modes:
1.
INPUT Y MODE :
In this mode, A single output from the mixer feeds the entire system to drive both the
Sub + Tops.
2.
DUAL MODE :
In this mode, both the Sub and Tops can be driven from different outputs of the Mixer to
enable additional control over the Sub + Top Balance of the system.
From Mixer
From Mixer
From Mixer Aux Out
INPUT Y MODE
DUAL MODE
