Basspro Nano
EN
WIRING FOR POWER AND GROUND
Remote turn-on (blue) to
aftermarket stereo REM out
+12V (red)
Ground
(black)
Fuse holder, 15A fuse
Chassis ground (–)
Battery
18” (46cm)
WIRING FOR AUDIO SIGNAL
Line-level from aftermarket stereo
Right line output
(from stereo)
Left line output
(from stereo)
NOTE:
When connecting an aftermarket stereo to the BassPro
Nano’s line-level inputs and remote turn-on wire, set the
button to
.
Speaker-level from factory or aftermarket stereo
Right + (from stereo)
Right – (from stereo)
Left – (from stereo)
Left + (from stereo)
Harness high-level input wire guide
White/White with black stripe
Left + / Left -
Gray/Gray with black stripe
Right + / Right -
ABOUT THE MANUAL
This manual displays general Owner’s Manual guideline. However,
please note that proper installation of mobile audio components
requires qualified experience. If you do not have the knowledge
and tools to successfully perform this installation, we strongly
recommend consulting an authorized JBL dealer about your
installation options. Keep all instructions and sales receipts for
reference.
WHAT’S IN THE BOX
1X
1X
1X
1X
1X
2X 4X
8X
4X
MOUNTING THE BASSPRO NANO
Recommended location: under the passenger seat
NOTE:
Before securing the BassPro Nano with mounting screws,
check beneath the mounting surface to ensure you will not
puncture fuel lines, brake lines, or any vehicle wires. Also ensure
that the BassPro Nano will not interfere with seat operation or
wiring, or block underseat heater/air conditioning vents.
