16
JBJ AQUARIUMS
17
Handling
•
Do not lift or move aquarium when filled with water
•
Drain water to at 50% before lifting or moving aquarium
•
Do not lift aquarium from side walls or light fixture
•
Move or Lift Aquarium from the underneath
Choosing A Location
•
Find a leveled surface that can support the weight of the
tank, water, and livestock. An average aquarium can weigh
10 Lb per gallon once filled with water, rock, gravel, and
other accessories.
•
Place Aquarium on Leveling Mat provided
•
Do not place in direct sunlight to prevent excessive algae
growth and higher water temperatures.
Getting
Started
Filter Media Placement
•
Rinse Filter Media for 30 seconds or until water runs clear
prior to placement.
•
Place filter media provided in the first column on the left
side where the overflow is located.
•
It is recommended to place the filter
media as shown in the picture.
Filling the Aquarium
•
Always dechlorinate tap water before adding into the
aquarium.
•
Always fill with room temperature water.
•
Fill the main body of the Nano Rimless Aquarium until
water flows through overflow on the filter wall. Once the
back filter/ pump chamber is full, plug in pump power
cord(s) into an approved electrical outlet with a fuse or
circuit breaker.
•
Once pump is on, water will flow from the back filter
chambers through the directional flow nozzle into the
main body of the Rimless Flat Panel. Adjust accordingly to
desired flow position.
GETTING STARTED
COARSE SPONGE
ACTIVATED CARBON
CERAMIC RINGS
