8
JBJ AQUARIUMS
9
1. Mounting Pump on Filter Body
• Insert pump outlet into opening on bottom of main filter
body. Make be sure that the pump tube in fully inserted
into the rubber sleeve.
• Secure pump to filter body by tightening screw clockwise.
2. Water Intake Assembly
•
Connect T-pipe with surface skimmer elbow and prefilter
pipe.
• Slide prefilter sponge over the prefilter pipe.
• Mount surface skimmer pipe to surface skimmer elbow.
• Connect entire assembly to the water inlet on filter body.
(Refer to figure 3 & 4 on next page)
Getting
Started
GETTING STARTED
3. Flow Control Valve Assembly
• Connect flow control valve elbow to flow control pipe.
• Place O-ring into the flow control pipe and insert the flow
control knob into the flow control pipe.
• Connect flow control assembly to the filter body.
