2.
INSTALLING YOUR ELECTRIC PUNCHING / BINDING MACHINE
10
T
T
h
h
e
e
P
P
u
u
n
n
c
c
h
h
-
-
B
B
i
i
n
n
d
d
is an office machine. It must be positioned in such a way as to allow access to
the perforation tray from the right side of the machine. It will also need clearance behind the
machine for adequate ventilation.
A
llow about 40cm clearance at the right hand side of the machine so that the punch tool can be
easily withdrawn from that machine or the perforation tray can be removed.
A
lso allow clearance at the left hand side of the machine so that the punched paper can be stacked
afer punching.
E
nsure that a single phase electric connection point is provided nearby : 16 Amp with protection
30mA curve C (with earth, standard C15-100 may 1999).
Left side
(Handle position)
Right side
(Handle position)
2.1
LIFTING THE MACHINE
!
WARNING
1)
For personal safety and before lifting the machine, switch off, remove the plug from electric
supply.
2)
The machine weighs 35 Kg :
Lift the machine with care or
ask someone to give you a hand
. It
is better that two people lift the machine.
3)
Never lift the machine by the front end of the table. The machine must be lifted by the two sides
(see above drawing). Always remove the perforation tray before lifting the machine.
Summary of Contents for PUNCH-BIND
Page 7: ......
