6
MAINTENANCE
CHANGING THE HEATING SET
Ensure that the tool is stopped.
Use a wrench to unscrew the cover.
FOLLOW THIS PROCESS INVERTED TO RE-CONNECT THE HEATING ELEMENT
This step has to be performed when the tool is stopped and the heating set is cold.
1. Untighten screw.
2. Separate the heating element from the heating set’s handle.
3. Connect the new heating element, pushing it’s extreme.
4. Insert screw to avoid air-loss which could reduce the heating element’s lifetime.
Move back the cover. Pull the connector from the socket to disconnect the heating set from the station.
Follow this process inverted to re-connect the heating set.
Heating element
0006997 (230V/120V/100V)
Handle
0005896
Heating set
TE-TA (230V/120V/100V)