Maximum working temp: 250ºC (482ºF)
10
11
1
2
3
4
Suction Cups
Ref. 0930110
Extractor Desk
Extractor desk
Ref. 0008752
Protectors
and extractors
not included.
This accessory lets you quickly switch between different models of extractors and protectors.
There are two drawers for storage.
Find the model that best suits your soldering needs in
www.jbctools.com
Protector
Extractor
Manual extractor
Tripod
We recommend using the pro tripod.
We recommend using the extractor.
1. Suction
Pick & Place
Ref. T260-A
2. Release
This tool helps you easily place and remove SMDs of any size thanks to the suction system.
Pick & Place
Hot Air Accessories
(not supplied with TE-Q)
Press the button to
start/stop the suction
Once the suction is
activated, cover the
pen hole with your
finger and lift off the
component.
Insert the needle
with the appropriate
cup for a correct
suction process.
Lift your finger
to release the
component in the
appropriate place.
You should
avoid the needle
protruding from the
lower part.
Pick & Place
Ref. T260-A
Straight
Needles Set
Ref. 0901546
Bent Needles Set
Ref. 0861660
For small components
(fig. 1 and 2).
For big components
(fig. 3 and 4).
Choose the needle and the suction cup that best fits the component and start working as follows:
Operation
www.jbctools.com
10
11