Insert the slide-on tabs into
the new grip.
Push the grip with the tabs
onto the handle.
Hold the grip and pull them
out. Use a pliers if necessary.
tabs
new grip
Easily replace the
Grips
(Ref. 0016057 and Ref. 0018658) using the slide-on tabs.
Before replacing the grip, unplug the power supply and make sure the device is not hot.
1. Inserting tabs
2. Inserting handle
3. Removing tabs
Replacing grips
Maintenance
- Before carrying out maintenance, always unplug the stand and the tool.
- Check periodically that the metal parts of the tool and the stand are clean to ensure detection of
the tool when it is in the stand. Use a damp cloth or alcohol.
- Periodically check all cables and tubes connections.
- Replace any defective or damaged pieces. Use original JBC spare parts only. Repairs should only
be performed by a JBC authorized technical service.
www.jbctools.com
7
