![background image](http://html1.mh-extra.com/html/jbc/sfr-b/sfr-b_instruction-manual_636687009.webp)
SFR-B
GSFR
SFR-B
GSFR
Solder Wire
Wheels
Inlet
Nozzle
Guide
Tube
Intermediate
Nozzle
Intermediate
Nozzle
Solder Wire Loading
The GSFR must be assembled previously.
1.
Feed the Solder Wire into the Inlet Nozzle until it reaches the wheels.
2.
Make sure the wire passes through the Intermediate Nozzle and enters into the Guide Tube.
Important:
Set the wire thickness parameter before starting to dispense wire. To set W-THI Code
see the Communication Protocol for SFR unit at
www.jbctools.com/jbcsoftware.html.
Wire feeding is controlled by an external controller (Robot/PLC/Computer). See the Communication
Protocol for SFR unit at
www.jbctools.com/jbcsoftware.html
1
2
www.jbctools.com
9