jbc RWS-A, Manual

Page: 4 / 28

Height Adjustment
The RWS-A Arm allows adjustment for
different heights according to your work needs
through the vertical axis rule.
Slide the tool holder to the appropriate height
and secure by tightening the lower knob to
guarantee stability. Make sure the upper knob is
loosened before sliding the tool holder.
Assembly
Fit the tool arm onto the base and tighten the
screw. Slide the adapter along the hose to the end of
the handle.
1. Setting up the Tool Arm
3. Mounting the Tool 4. Place the hose in the clamp.
2. Inserting the Adapter (JT/TE)
Adapter
Insert the tool as far as possible.
Allen key
Lower knob
Upper knob
4