Maintenance
Before carrying out maintenance or storage,
always allow the support to cool down.
- Check periodically that the Support is clean,
especially the axes of the sliding guide.
- Use a damp cloth when cleaning. Alcohol
can only be used to clean the metal parts
- Replace any defective or damaged piece.
Use original JBC spare parts only.
- Repairs should only be performed by a JBC
authorized technical service.
Safety
It is imperative to follow safety guidelines to prevent electric
shock, injury, fire or explosion.
- When using the support with a preheater unit, the temperature of accessible surfaces may remain high
after the unit is turned off. Handle with care.
- Be careful with the remains of liquid tin. In contact with the skin, it can cause burns.
- Avoid flux coming into contact with skin or eyes to prevent irritation.
- Be careful with the smoke produced when soldering.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when
working to avoid personal harm.
- This appliance can be used by children over the age of eight as well as persons with reduced
physical, sensory or mental capabilities or lacking experience provided that they have been given
adequate supervision or instruction concerning the use of the appliance and understand the hazards
involved. Children must not play with the appliance.
- Maintenance must not be carried out by children unless supervised.
6
Sliding Guide Axes
