How to use
2.
Place the PCB with the tape on the PCB Holder. After use it can be
easily removed without leaving any residue. It can also be reused.
High emissivity tape provides a 10x faster and more uniform preheating
of PCBs with metal substrates due to greater absorption of infrared.
Resistant and reusable tapes. Does not deform after use.
Supplied in reels for easy cutting.
PCB with
metal substrats
Packing List
Features
The following items should be included:
Thermally Conductive Tape
Ref. PH222
Thermally Conductive Tape
Ref. PH223
Thermally
Conductive Tape
.......... 1 unit
See the reference below.
Manual
............................. 1 unit
Ref. 0014928
50 mm
25 mm
1.
Cut the tape to size and fix onto the underside of the PCB.
JBC recommends covering the whole underside. Partial covering may
cause deformity or damage to the PCB due to an unequal heating.
IR Preheater
Ref. PH-B
PCB Holder
Ref. PH321
Thermally
conductive
tape
2
3
www.jbctools.com
