3
The pedal P-305 has been created for those users that want to use the tool to place the electronic
component in the correct position on the PCB, causing no thermal stress to the component until the solder
joint is made.
SETTING UP THE STATION
In orther to make the tool not to heat the component until the pedal is pressed, the
Hibernation Delay
feature of the station has to be set to
0 min
. See the station manual for instructions on how to navigate
through the Menu.
NOTE: Once in the main menu, if the pedal is already connected to the station, take the tool out
of the stand and press and hold the pedal before entering the Tool Settings menu. Once in it, you
can release the pedal.
WORKING
Use the tool to place the component in
correct position on the PCB.
Once in the correct position,
PRESS
and
HOLD
the pedal to make the solder joint.
