![background image](http://html1.mh-extra.com/html/jbc/nase-b/nase-b_manual_3896305011.webp)
Maintenance
Before carrying out maintenance or storage, always allow the equipment to cool.
- Clean the station screen with a glass cleaner
or a damp cloth.
- Use a damp cloth to clean the casing and the
tool. Alcohol can only be used to clean the
metal parts.
- Periodically check that the metal parts of the
tool and stand are clean so that the station
can detect the tool status.
- Maintain tip surface clean and tinned prior to
storage in order to avoid tip oxidation. Rusty
and dirty surfaces reduce heat transfer to the
solder joint.
- Periodically check all cables and tubes.
- Replace a blown fuse as follows:
- Replace any defective or damaged pieces. Use original JBC spare parts only.
- Repairs should only be performed by a JBC authorized technical service.
1.
Pull off the fuse holder and remove the
fuse. If necessary use a tool to lever it off.
2.
Press the new fuse into the fuse holder
and replace it in the station.
Fuse holder
Fuse holder
Fuse
Clean periodically
www.jbctools.com
11
Summary of Contents for NASE-B
Page 1: ...Nano Rework station Ref NASE B www jbctools com...
Page 14: ...Exploded View 14...
Page 15: ...www jbctools com 15...