![background image](http://html1.mh-extra.com/html/jbc/lc-2ba/lc-2ba_instruction-manual_3527629010.webp)
Before carrying out maintenance, always allow the equipment to cool.
- Clean the station screen with a glass cleaner
or a damp cloth.
- Use a damp cloth to clean the casing and the
tool. Alcohol can only be used to clean the
metal parts.
- Periodically check that the metal parts of the
tool and stand are clean so that the station
can detect the tool status.
- Maintain tip surface clean and tinned prior to
storage in order to avoid tip oxidation.
Rusty and dirty surfaces reduce heat transfer
to the solder joint.
- Periodically check all cables and tubes.
Maintenance
1. Pull off the fuse holder and remove the
fuse. If necessary use a tool to lever it off.
2. Press the new fuse into the fuse holder
and replace it in the station.
- Replace a blown fuse as follows:
- Replace any defective or damaged pieces. Use original JBC spare parts only.
- Repairs should only be performed by a JBC authorized technical service.
Clean
periodically
10
Summary of Contents for LC-2BA
Page 1: ...Soldering Station Ref LC 2BA INSTRUCTION MANUAL www jbctools com...
Page 13: ...Notes www jbctools com 13...
Page 14: ...Notes 14...
Page 15: ...Notes www jbctools com 15...