jbc JTSE-A, Manual, Page: 13 / 20

13
www.jbctools.com
13
Choose the needle and the suction cup that best fits the component and start as follows:
Operation
1. Suction 2. Release
This tool helps you place and remove SMDs of any size easily thanks to the suction pump.
Pick & Place
(not supplied with JT)
Press the button to
start/stop the suction
Once the suction is
activated, cover the
pen hole with your
finger and lift off the
component. Insert the needle with
the appropriate cup
for a correct suction
process. Lift your finger to
release the
component. Make sure the needle
does not protrude
from the cup.
Pick & Place
Ref. T260-A
Straight Needles Set
Ref. 0901546
Bent Needles Set
Ref. 0861660
Maximum working temp: 250ºC (482ºF)