Maintenance
Before carrying out maintenance or storage, always unplug the stand from the station and the tool.
- Use a damp cloth to clean the stand. Alcohol can only be used to clean the metal parts.
- Periodically check that the metal parts of the tool and stand
are clean so that the station can detect the tool status.
- Periodically check all cables and tubes.
- Replace any defective or damaged parts.
- Only use original JBC spare parts.
- Repairs should only be performed by a
JBC authorized technical service.
Clean
periodically
Operating Modes
1.
From the Tool Settings Menu, select the mode to activate the tool depending on the task.
2.
The tool stops blowing when pressing the start/stop button.
If the stand is connected to the station and for safety it will also stop when returned to the stand.
Tool button
Pedal*
Press the start/stop button to blow hot air.
Press the Pedal to blow hot air and release
to stop.
*The
P-005
Pedal is not supplied with this
station.
Press
Press
www.jbctools.com
3
