Stand for JT
Ref. JT-SD
www.jbctools.com
Page 1: ...Stand for JT Ref JT SD www jbctools com ...
Page 2: ...Stand for JT Ref JT SD Features Adjust the tool holder angle to suit your work position Removing the Nozzles Used to remove the JT Nozzles Adjustable Stand Power Socket Fuse USB connector Robot RS232 connector P 005 Pedal connection Equipotential connector Auxiliar connector Stand Ref JT SD 2 www jbctools com ...
Page 3: ...arts Only use original JBC spare parts Repairs should only be performed by a JBC authorized technical service Clean periodically Operating Modes 1 From the Tool Settings Menu select the mode to activate the tool depending on the task 2 The tool stops blowing when pressing the start stop button If the stand is connected to the station and for safety it will also stop when returned to the stand Tool...
Page 4: ... JBC s 2 year warranty covers this equipment against all manufacturing defects including the replacement of defective parts and labour Warranty does not cover product wear or misuse In order for the warranty to be valid equipment must be returned postage paid to the dealer where it was purchased Weight 1 24 kg 2 73 lb Dimensions 80 x 110 x 150 mm 3 15 x 4 33 x 5 91 in Complies with CE standards ES...
