background image

OK

350

ºC

Port

1

Power

45%

Temp. Levels

T245

250

350

380

17:14

OK

350

ºC

Port

1

Power

45%

Temp. Levels

T245

250

350

380

17:14

OK

350

ºC

Port

1

Power

45%

Temp. Levels

T245

250

350

380

17:14

13

CLM Features

Improve thermal transfer by cleaning the tip after each solder joint.

Brass wool

Ref. CL6210

Splashguard

Ref. 0017576

Very effective cleaning 
method. It leaves a small 
layer of solder on the tip to 
prevent oxidation between 
cleaning and rewetting.

It prevents splashing of 
solder particles when 
using the brass wool.

ESD Tip Wiper

Ref. CL0240

A temperature resistant 
receptacle lets the 
operator remove 
excess solder by gentle 
tapping or wiping. 

Antisplash
Membrane

Ref. 0017574

Prevents splashing 
to maintain the 
work area clean.

Non-slip base

Sponge

Ref. S0354

No need to hold the base 
while cleaning tips.

The least harmful 
cleaning method. Keep 
the sponge damp with 
distilled water when 
working to avoid tip wear.

Tapping:

Wiping:

Tap to remove excess solder.

Use the slots to remove remaining particles.

Maintenance

Before carrying out maintenance or storage, always allow the equipment to cool. 

- Clean the station screen with a glass cleaner  

or a damp cloth.

1.

 Pull off the fuse holder and remove the  

 fuse. If necessary use a tool to lever it off.

2. 

Press the new fuse into the fuse holder  

  and replace it in the station.

- Use a damp cloth to clean the casing and the 

tool. Alcohol can only be used to clean the 
metal parts.

- Periodically check that the metal parts of the 

tool and stand are clean so that the station 
can detect the tool status.

- Maintain tip surface clean and tinned prior to 

storage in order to avoid tip oxidation. Rusty 
and dirty surfaces reduce heat transfer to the 
solder joint.

- Periodically check all cables and tubes.

Clean periodically

Fuse holder

Fuse holder

Fuse

40 mm

50 mm

60 mm

80 mm

100 mm

130 mm

130 mm

para manuales - color gris

200 mm

300 mm

Summary of Contents for HDE-1D

















Reviews: