OK
No
Yes
OK
No
Yes
OK
No
Yes
First disassemble the tool holder
by loosening the set screw (1).
Remove the tool holder (2) and
replace it with the new one.
Insert the new tool holder bar
into the slot on the station (3) in
vertical position and as far as it
will go.
Note:
The flat area on the tool
holder bar must align with the
threaded hole (4) on the back of
the station.
Finally, tighten the set screw to
fix the tool holder.
Set Scew
(inside)
Tool
Holder
Flat Area
Threaded
Hole
Replacing the Tool Holder
1
2
4
3
3
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm
130 mm
para manuales - color gris
200 mm
300 mm
