Pedal
Ref. P-005
Peripherals
Port 2-T245
17:14
Pedal
None
Module
None
Module
FSE_a
None
MENU
17:14
?
Install
MODULE
Fume Extractor
Postpone
4
5
1.
Once it is set up, enter the
Peripherals
Menu
and select a port to connect the FSE.
2.
Select the FSE from the list. Remember
your first connection is denoted as “a”, the
second being “b”, etc. (e.g. FSE_a, FSE_b,...)
3.
Press Menu or Back to save changes.
Initial Set up
When a new module is detected, a
pop-up
appears and proceed as indicated.
If nothing appears on the screen, click on the
icon
and follow the instructions.
Once configured, you can change the FSE settings by entering the
Peripherals
Menu.
For DDE Control Unit
For DME Control Unit
For DME and DDE Control Units
It disappears
when the
installation is
completed
1.
When the tool is lifted from the stand the fume extractor is automatically activated.
2.
When the tool is returned to the stand the fume extractor stops. Tool temperature drops to go into
Sleep mode.
Use this foot switch to
enable/disable
a
module or make the tool enter/exit
Sleep
mode.
Operation
Accessories
The green light indicates
the FSE is in use
The red light
indicates the FSE
is ready
Fume extractor tube
See the different models on the website.
This tube is an easy & safe solution to
remove the fumes generated at the solder
joint. It requires a fume extractor.
www.jbctools.com
