Peripherals
17:14
Port 1 2 3 4
MS a
?
PERIPHERAL
Peripheral 1 plugged:
Setup
Postpone
Pneumatic Suction Module
Peripherals
17:14
Port 1 2 3 4
PD a
?
MV a
Port 2
MENU
17:14
?
Port 1
Port 3
Port 4
Hibern.
Sleep
350º
C120-001
C560-001
Hibern.
C210-001
C560-903
See the information for all ports in real time when pressing the tool image on the Work screen.
Simultaneous control of ports
1.
To configure your Pneumatic Suction
Module press Setup in the popup window.
MVE Initial Setup
After connecting the pneumatic desoldering module (MVE-A), a popup window is
opened.
2.
Select the module from the list of peripheral
connections.Remember your first connection
is denoted as “a”, the second being “b”, etc.
(e.g. MV_a, MV_b,...). Do the same with the
pedal (e.g. PD_a,...)
3.
Select the port of the tool you want to link to
the peripheral.
4.
Press Menu or Back to save changes.
Once set up, you can change the module
settings by entering the
Peripherals
Menu.
Peripherals
Tool port
Press any port
to show on the
Work Screen
Tool Status
Tip temperature,
Sleep or
Hibernation
8
