background image

OK

TOOL

EAR

THING FUSE

AUX

USE ONL

WITH A 250 

V FUSE

OK

TOOL

EAR

THING FUSE

AUX

USE ONL

WITH A 250 

V FUSE

OK

TOOL

EAR

THING FUSE

AUX

USE ONL

WITH A 250 

V FUSE

CD-Q:

OK

Adjustable Stand

Cable Collector 

(Ref. CC1001)

Adjust the tool stand to suit 
your work position.

Tip Cleaner

Select the option to suit your needs and improve the thermal transfer of the tip.

Splashguard

Ref. 0017576

When using the brass wool, it prevents 
splashing of solder particles. 

Antisplash Membrane

Ref. 0017574

Prevents splashing and keeps 
the work area clean.

Brass Wool

Ref. CL6210

Very effective cleaning 
method. Leaves a 
small layer of solder 
on the tip preventing 
oxidation between 
cleaning and rewetting.

Wiper

Ref. CL0160

A temperature resistant receptacle for removing 
excess solder by gently tapping or wiping.

If the tip is very dirty, 
JBC recommends first 
cleaning it with the wiper 
to remove excess solder.

The Cable Collector keeps the cable away from the work area 
and prevents that the weight of the cable from disturbing the 
operator while soldering.

Insert the cable into the clip 
and then insert into the Cable 
Collector. Do not leave the 
cable longer than necessary 
to reach the work area freely.

The Cable Collector is 
flexible. It accompanies and 
adapts to the movements 
during the soldering process.

OK

TOOL

EAR

THING FUSE

AUX

USE ONL

WITH A 250 

V FUSE

OK

TOOL

EAR

THING FUSE

AUX

USE ONL

WITH A 250 

V FUSE

OK

TOOL

EAR

THING FUSE

AUX

USE ONL

WITH A 250 

V FUSE

OK

TOOL

EAR

THING FUSE

AUX

USE ONL

WITH A 250 

V FUSE

OK

TOOL

EAR

THING FUSE

AUX

USE ONL

WITH A 250 

V FUSE

Removing the Splashguard

1.

 Unlock the splashguard.

2.

 Lift off.

Lock

More cleaning options (not supplied):

Inox Wool

Ref. CL6205
Stronger cleaning 
method than brass 
wool.

Metal Brush

Ref. CL6220 
When used carefully, 
it provides a more 
thorough cleaning.

Sponge

Ref. S0354

Tapping:

Tap gently to remove excess 
solder.

Wiping:

Use the slots to remove 
remaining particles.

Wiper

Ref. CL0160

The softest cleaning method. 
Keep the sponge damp with 
distilled water when working 
to avoid tip wear.

www.jbctools.com

5

Summary of Contents for CD-SQF

















Reviews: