background image

Before carrying out maintenance, always allow the equipment to cool.
- Clean the station screen with a glass cleaner or a damp cloth.

Clean  
periodically

- Use a damp cloth to clean the casing and the 

tool. Alcohol can only be used to clean the 
metal parts.

- Periodically check that the metal parts of the 

tool and stand are clean so that the station 
can detect the tool status. 

- Maintain tip surface clean and tinned prior to 

storage in order to avoid tip oxidation.  
Rusty and dirty surfaces reduce heat transfer 
to the solder joint.

- Periodically check all cables and tubes.

Maintenance

1. Pull off the fuse holder and remove the 
  fuse. If necessary use a tool to lever it off.

2. Press the new fuse into the fuse holder 
  and replace it in the station.

- Replace a blown fuse as follows:

- Replace any defective or damaged pieces. Use original JBC spare parts only. 

- Repairs should only be performed by a JBC authorized technical service.

Hibernation Delay

Set the time the tool will 
remain at Sleep temperature 
before entering the Hiber-
nation mode. At this time, 
the power supply is cut off 
and the tip remains at room 
temperature.

Recommendations

Parameter description

Warnings

Increasing the default 

value will accelerate  
oxidation and shorten the 
tip life.

When the user chan-

ges the cartridge type, the 
parameter should be reset 
to 0°C/F or to the value 
needed for this cartridge. 
E.g. If a correction of 
+20°C (+36°F) is set for the 
C245966 (thick type) and 
then the user changes the 
cartridge for a C245030 
(which is thinner) without 
resetting, they would be 
working at a temperature 
of +20°C (+36°F) lower for 
the C245030 which does 
not need any temperature 
adjustment.

This function completely 
protects the tip from oxidation 
during long periods of inactivi-
ty while the tool is in the stand.  
Retinning the tip before pla-
cing the tool in the stand also 
helps prevent oxidation and 
extends the life of the tip. 

Temp Adjustment

It provides a more precise 
adjustment between the 
selected temperature and the 
actual one.

Set values within ±50°C  
(± 90°F) to achieve zero error. 
JBC strongly recommends 
the use of TID-A or TIA-A 
Thermometers to obtain 
precise readings.

Tool Settings

www.jbctools.com

12

13

Summary of Contents for CD-SE










Reviews: