3
- Loosen the cartridge screw (
1
) to release the cartridge.
- Place the cartridge in the solder feed handle.
Important:
It is essential to insert the cartridge till the end for a good connection. Use the mark
as reference.
- Align the tip of the cartridge with the solder guide tube (
3
). Tighten the cartridge screw (
1
).
WARNING:
It is esential to tighten (
1
) screw for the tool to function.
- You must leave a gap of 8-10 mm between cartridge tip and the end of the guide tube (
2
). Loosen the
guide screw (
4
). Adjust the guide tube and tighten screw (
4
).
CHANGING THE HANDPIECE’S CARTRIDGES
AL-IA
HANDS-FREE SOLDERING ARM
AND FUME EXTRACTOR
F4468
FUME EXTRACTOR
ACCESSORIES
1
2
4
3
8-10 mm
Cartridge screw
Guide tube screw
Alignment
