jbc AD 4200, Manual

Page: 9 / 16

8
MICRO HOT TWEEZERS PA 1200
For micro hot tweezers to work properly, the
following modules are required:
- Control unit.
- Micro hot tweezers PA 1200 ref. 1200000. For
general precision desoldering with SMD
components.
Power: 40W.
Effective power per cartridge fitted: 20W.
- Stand PA 8100 ref. 0748100.
- A set of cartridges (see range).
Changing the cartridge
To extract the cartridge the screw needs to be
unfastened and the cartridge pulled out. Insert
the new cartridge and push it thoroughly. Then
check that both tips of the tweezers coincide
and screw it.
Important.
- It is essential to insert the cartridge till
the end for a good connection. Take the
mark as reference and check that both
parts of the tweezer coincide.
Alignment
RANGE OF CARTRIDGES
PA 1200 has an individual temperature control
for each cartridge so it is supplied individually.
1200
JBC
1200-001
95238
CHIP COMPONENTS
IC COMPONENTS
1200-001
ø0.007”
1200-002
ø0.007”
0.059”
1200-004
ø0.027”
0.059”
1200-005
0.196”
1200-003
0.118”
PATENT PENDING
All the cartridges shown are actual size.