background image

8

JB INDUSTRIES 

 •  QUEST LD-3000 Operating Manual  •  630.851.9444  •  [email protected]

PARTS LIST

RETURN FOR REPAIR

Every effort has been made to provide reliable, superior quality products. However, in the event your instrument 

requires repair, please contact JB Customer Service Department to obtain a Return Goods Authorization (RGA) 

number. Ensure that all returned products are packed to avoid any damage in shipment. Paperwork should be 

placed in a separate plastic bag and should include JB’s assigned RGA number, a description of the problem 

and any customer assigned repair or purchase order number, if applicable.

Contact Customer Service for RGA number: 

  

 

800.323.0811 Toll 

800.552.5593 Toll Fax

Products should be shipped with freight prepaid to:

    

 JB  Industries

 

RGA#_________  

601 N. Farnsworth Ave. 

Aurora, IL 60505 

630.851.9444 Tel 

630.851.9448 Fax

WARRANTY

The LDC-4000 is warrantied against defects in materials and workmanship for 1 year from date of purchase.  

JB products are guaranteed when used in accordance with our guidelines and recommendations. Warranty 

is limited to the repair, replacement, or credit at invoice price, (our option) of products which in our opinion 

are defective due to workmanship and/or materials. In no case will we allow charges for labor, expense or 

consequential damage. Repairs performed on items out of warranty will be invoiced on a nominal basis; contact 

wholesaler for details. Additional product information available online at www.jbind.com.

WARNING:

 This product can expose you to chemicals including lead which are known to the State  

of California to cause cancer and birth defects or other reproductive harm. For more information go to  

www.P65Warnings.ca.gov.

JB INDUSTRIES

©2019 JB Industries, Inc.  1019

PART NO.

DESCRIPTION

LDC-4000

Combustible Gas and HC Refrigerant Leak Detector in case

LDC-4000-1

Replacement sensor (4 prong)

LDC-4000-2

Replacement sensor cover

LDC-4000-3

Combustible leak test vial

LDC-4000-4

Protective carrying case

LD-CS

Protective carrying case

LD-ST

Replacement sensor tip

LDC-4000 Manual 1019.indd   8

LDC-4000 Manual 1019.indd   8

12/19/19   2:13 PM

12/19/19   2:13 PM

Summary of Contents for LDC-4000









Reviews: