ENGLISH
OPERATION MANUAL
JB SYSTEMS
®
2/4
YETI
Don’t place metal objects or spill liquid inside the unit. Electric shock or malfunction may result. If a foreign
object enters the unit, immediately disconnect the mains power.
Locate the unit in a well ventilated spot, away from any flammable materials and/or liquids.
Don’t cover any ventilation openings as this may result in overheating.
Prevent use in dusty environments and clean the unit regularly.
Keep the unit away from children.
Inexperienced persons should not operate this device.
Maximum save ambient temperature is 40
°C. Don’t use this unit at higher ambient temperatures.
Make sure to always place the unit on a stable surface.
Always unplug the unit when it is not used for a longer time or before you start servicing.
Check that the available voltage is not higher than the one stated on the rear panel of the unit.
The power cord should always be in perfect condition. Switch the unit immediately off when the power cord
is squashed or damaged. It must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Never let the power-cord come into contact with other cables!
This unit must be earthed in order comply with safety regulations.
In order to prevent electric shock, do not open the cover.
Never
repair a fuse or bypass the fuse holder.
Always
replace a damaged fuse with a fuse of the same
type and electrical specifications!
In the event of serious operating problems, stop using the unit and contact your dealer immediately.
The housing must be replaced if it is visibly damaged.
Please use the original packing when the device is to be transported.
Due to safety reasons it is prohibited to make unauthorized modifications to
the unit.
DESCRIPTION:
1. OUTPUT:
with this knob you can select the speed of the fan.
2. WIRELESS REMOTE INPUT:
Used to connect the supplied wireless
remote control receiver.
3. WIRED REMOTE INPUT:
Used to connect the supplied wired remote
controller.
4. POWER SWITCH:
Used to switch the power of the unit on/off.
5. INPUT FUSE:
When the fuse is blown, first locate and solve the problem
that caused the fuse to blow. When the problem is solved, replace a
damaged fuse with a fuse of the same type and electrical specifications.
(250V-8A)
6. MAINS CABLE:
to be plugged in a mains wall socket with earth
connection.
REMOTE CONTROLLER:
1. [OUTPUT] KNOB:
this knob is used to set the output volume.
Turn the knob clockwise to increase the output
Turn the knob counterclockwise to decrease the ouput
2. [POWER] LED:
when the unit is on, this Led will be lit.
3. [READY] LED:
when the fan is switched on by the on/off button, this LED will be lit.
4. [ON/OFF] BUTTON:
used to switch the fan on or off