ENGLISH
USER MANUAL
JB SYSTEMS®
3/4
USB PAR
HOW TO CONTROL THE UNIT
1) POWER THE UNIT
The unit needs 5V to be powered. This can be done in several ways:
•
Connect the unit with the provided USB cable and 5V/2A power adapter to the 230V mains.
•
Connect the unit to a 5V/2A car adapter
•
Connect the unit to a 5V/2A power bank
•
Connect the unit to the USB PARTYSET bar (see manual of the USB PARTYSET)
2) WORKING MODE
Select the working mode via the function switch on the back of the projector:
•
[CLOSE]: no light output
•
[AUTO]: the unit will run the internal automatic programs
•
[SOUND]: the unit will run internal automatic programs that will be controlled by the surrounding
sound or music
3) CONTROLLED VIA THE IR REMOTE CONTROLLER:
The unit can be controlled via the supplied IR remote
AUTO MODE
SOUND MODE
BLACKOUT
PROGRAM
SPEED
NOT USED
NOT USED
OVERHEAD RIGGING
•
Important:
The installation must be carried out by qualified service personal only. Improper
installation can result in serious injuries and/or damage to property. Overhead rigging requires
extensive experience! Working load limits should be respected, certified installation materials
should be used, the installed device should be inspected regularly for safety.
•
Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging
and servicing.
•
Locate the fixture in a well ventilated spot, far away from any flammable materials and/or liquids. The
fixture must be fixed
at least 50cm
from surrounding walls.
•
The device should be installed out of reach of people and outside areas where persons may walk by or be
seated.
•
The installation area can hold a minimum point load of 10tim
es the device’s weight.
•
Always use a certified safety cable that can hold 12 times the weight of the device when installing the unit.
This secondary safety attachment should be installed in a way that no part of the installation can drop
more than 20cm if the main attachment fails.
•
The device should be well fixed; a free-swinging mounting is dangerous and may not be considered!
•
The operator has to make sure that the safety-relating and machine-technical installations are approved by
an expert before using them for the first time. The installations should be inspected every year by a skilled
person to be sure that safety is still optimal.
COLOR
SELECTION
NOT USED
