ENGLISH
USER MANUAL
JB SYSTEMS
®
4/10
SUNBAR COMBI
HOW TO SET UP AND CONTROL THE UNIT
You can operate the unit in several ways:
1) FIXED MANUAL STANDALONE MODE:
•
Press the
[MENU] button until the display shows [MAn].
•
Press the [ENTER] button to enter the setup. The display shows [MAnu].
•
Press the [ENTER] button to enter the setup.
•
Use the [UP] and [DOWN] buttons to set the intensity for the white beams from [000] = off, to [255] =
Full on
•
Press the [ENTER] button. [S***] (S followed by numbers) appears on the display
•
Use the [UP] and [DOWN] buttons to set the strobe speed:
o
[S000] = no strobe, to [S098] = Full speed strobe
o
[S099] = Full ON
o
[S100] = Sound controlled strobe
•
Press the [ENTER] button to confirm.
•
Use the [UP] and [DOWN] buttons to set the intensity for the RED color from [000] = off, to [255] = Full
on
•
Press the [ENTER] button to confirm.
•
Use the [UP] and [DOWN] buttons to set the intensity for the GREEN color from [000] = off, to [255] =
Full on
•
Press the [ENTER] button to confirm.
•
Use the [UP] and [DOWN] buttons to set the intensity for the BLUE color from [000] = off, to [255] = Full
on
•
Press the [ENTER] button to confirm.
•
Use the [UP] and [DOWN] buttons to set the strobe speed for the RGB led
’s:
o
[S000] = no strobe, to [S098] = Full speed strobe
o
[S099] = Full ON
o
[S100] = Sound controlled strobe
•
Press the [ENTER] button to confirm
2) FULL AUTOMATIC STANDALONE MODE:
The effect automatically runs a preprogrammed sequence. Select this mode when only 1 unit is used
(standalone) or when the unit is placed as the first (master) unit in a chain with several units in
Master/Slave mode (see below).
Automatic show mode:
this is how to select one of the preprogrammed shows
•
Press the
[MENU] button until the display shows [Aut].
•
Press the [ENTER] button to enter the setup.
•
Use the [UP] and [DOWN] buttons to choose the type of automatic show you would like to use:
o
[CoL] = RGB Shows: select fixed colors, color fade or color chases
o
[bEA] = White Beam shows: select one of the beam patterns or full on
o
[Mi H] = Mixed shows: select one of the combined color + white beam shows
•
Press [ENTER] to enter the setting options for this mode
•
Use the [UP] and [DOWN] buttons to select one of the automatic shows
•
Press the [ENTER] button to confirm.
•
Use the [UP] and [DOWN] buttons to select the speed of the program (S.01 to S.99)
•
Press the [ENTER] button to confirm.
3) SOUND CONTROLLED STANDALONE MODE:
The Sunbar runs a preprogrammed sequence to the rhythm of the music. Select this mode when only 1
unit is used (standalone) or when the Sunbar is placed as the first (master) unit in a chain with several
units.
•
Press the
[MENU] button until the display shows [Sou].
•
Press the [ENTER] button to enter the setup.
•
Use the [UP] and [DOWN] buttons to choose the type of automatic show you would like to use:
o
[CoL] = RGB Shows: select fixed colors, color fade or color chases
o
[bEA] = White Beam shows: select one of the beam patterns or full on
o
[Mi H] = Mixed shows: select one of the combined color + white beam shows