ENGLISH
OPERATION MANUAL
JB SYSTEMS
®
4/5
MOVIL-1
FUNCTIONS
Important:
To prevent damage to the speakers of your speaker cabinet, please set all input levels
always
to zero
before
you switch the device on or connect a microphone / audio source. After this you can turn the
level up to the desired level.
1. LCD DISPLAY:
shows valuable information about the functions and the track number of the music.
2. MODE button:
press this button shortly to toggle between MP3-player (when a usb stick with music is
inserted) and Bluetooth
™
Press the button for a long period to switch the media player ON or OFF
3. PREVIOUS TRACK button:
•
Press shortly to select the previous track.
•
Press longer to navigate backwards in the song.
4. NEXT TRACK button:
•
Press shortly to select the next track.
•
Press longer to navigate forwards in the song.
5. PLAY/PAUSE button:
Press shortly to start/pause the current audio track.
6. LOOP button:
press this button to choose one of the different loop modes:
•
ONE:
repeat only the current track.
•
RANDOM:
play all tracks in random order.
•
FOLDER:
repeat all tracks of the current folder.
•
ALL:
repeat all tracks on the memory device.
7. TWS STEREO LINK:
use this button to activate the TWS function and link this unit to a second MOVIL-
1. When linked, you can stream music from your mobile device via Bluetooth in Stereo. (check the
section THE USE OF BLUETOOTH below)
8. VOLUME:
use these knobs to set the desired audio level for each individual channel.
9. ECHO:
use this button to set the level of delay effect that you want to add to this microphone channel.
10. MIC/LINE:
use this switch to adjust the input level, depending of the strength of your input signal.
Warning:
always turn down the channel volume when you use this switch !
11. COMBO INPUT:
This combined input connector accepts XLR connectors or JACK connectors for line
and microphone signals. Don
’t forget to adapt the MIC/LINE switch (16)
12. AUX INPUT:
stereo mini jack
to connect an external sound source (tablet, pc, etc. )
13. USB-input:
here you can connect a USB-stick. As soon as the memory device is inserted, the music
starts playing.
Important note: the USB-memory should be formatted in FAT32. If a new USB-stick is not detected,
please format it first using a Windows PC.
DON
’T USE THIS CONNECTOR TO CHARGE YOUR MOBILE DEVICES
14. VOLUME:
used to adjust the volume of the internal player / Bluetooth or the stereo mini jack input AUX
(12).
15. TREBLE:
with this tone control you can adjust the high frequencies of the general sound output. The
centre position = neutral.
16. BASS:
with this tone control you can adjust the low frequencies of the general sound output. The
centre position = neutral.
17. MASTER:
is used to set the overall sound level of the unit.
18. MIX OUT:
can be used to send the audio signal to another powered speaker or amplifier.
19. BATTERY LEVEL INDICATOR:
Shows the power status of the battery.
Charging the battery:
When the unit is connected to the mains and the power of the unit is switched
off, the CHARGE Led will be red when the battery is charging. Once the battery is fully charged, the
CHARGE Led will turn green.
20. POWER SWITCH:
used to switch the unit ON/OFF. Remember to always set the output level to zero
before to switch the unit on or off !
21. MAINS SOCKET:
with integrated fuse holder. Connect the supplied mains cable here.
Important: always replace a broken fuse with a fuse that has the exact same specifications. If a fuse would
blow up several times, stop using the unit and bring it in for check-up and/or repair.
