JB Systems LIVE-6, Operation Manual, Page: 8 / 12

ENGLISH USER MANUAL
JB SYSTEMS 6/7 LIVE-6 / LIVE-10
▪
[ALL]: all the songs on the USB device will be played over and over again
•
[bt] : Bluetooth is active and ready to receive music from your smartphone, tablet or other Bluetooth device.
If your device has already been connected to the mixer before, the connection will be made automatically.
o
Play/Pause/REC button: can be used to start or pause the playback of a song
o
Back/- button:
▪
press it shortly to go to the previous song on the Bluetooth device.
▪
press it longer to decrease the playback volume
o
F button:
▪
press it shortly to go to the next song on the Bluetooth device.
▪
press it longer to increase the playback volume (max = 30)
•
[rEC] : when an USB stick is connected to the unit, you can now record the sound of your MAIN output to
your USB stick in MP3 format (125kbps). The recording level is influenced by the level of the MAIN output
(faders). Press the REC button for a couple of seconds to start recording.
•
[PC]: your computer is connected to the mixer. All the audio from your computer will now be sent to the mixer
(from audio files, video files, etc.).
IMPORTANT: When you connect the mixer for the first time to your computer, please wait until the automatic
installation is finished.
o
Play/Pause/REC button: can be used to start or pause the playback of the music source on your
computer (audio file, video file, etc.)
o
Back/- button:
▪
press it shortly to go to the previous file when a playlist is selected in your computer (audio
or video)
▪
press it longer to decrease the playback volume of your computer
o
F button:
▪
press it shortly to go to the previous file when a playlist is selected in your computer (audio
or video).
▪
press it longer to increase the playback volume of your computer
IMPORTANT REMARK:
we strongly advise you to don’t lower the playback volume with the [BACK/-] button if it is not
really necessary, especially when you are playing music from an USB device. If you put it on “zero” and forget you did this
(or another user works with the mixer) there will be no sound available when you try to play a song of the USB device or
Bluetooth device !
😊
22. [STEREO IN] connector: this minijack can be used to connect a tablet or phone via wire.
Important:
don’t use this input (22) when a signal is already sent via the jack inputs (27) because both
signals would be routed to the same channel
23. [POWER] SWITCH: Used to turn the power of the mixer on and off. The red POWER led (17) on the front
of the unit is lit when the mixer is switched on.
24. USB connector: can be used for different purposes
•
Insert an USB stick: for the recording of the main mix (mp3) or for the playback of
WMA, WAV, FLAC, APE
and MP3 files
•
Use a USB-A / USB-A cable to connect a computer. This port is bidirectional, so you can playback music
from your computer or use the computer to record the main mix output
•
Can eventually also be used to power the unit
25. [CONTROL ROOM]: The output level can be controlled via the PHONES/CONTROL ROOM knob (31)
26. [MAIN]: Use the balanced XLR-connectors to connect this mixer to any amplifier or active speakers.
27. [LINE] inputs: Stereo Line input via Jack connectors. Connect your source to the LEFT input connector
If you want to use this channel as a mono Line input.
28. [LINE] inputs: Stereo Line input via Jack connectors. Connect your source to the LEFT input connector
If you want to use this channel as a mono Line input.
Important:
don’t use these inputs (27) when a signal is already sent via the stereo mini-jack input (22)
because both signals would be routed to the same channel