ENGLISH
USER MANUAL
JB SYSTEMS®
5/54
INVADER
Before rigging make sure that the installation area can hold a minimum point load of 10times the device’s
weight.
Always use a certified safety cable that can hold 12 times the weight of the device when installing the unit.
This secondary safety attachment should be installed in a way that no part of the installation can drop
more than 20cm if the main attachment fails.
The device should be well fixed; a free-swinging mounting is dangerous and may not be considered!
Don’t cover any ventilation openings as this may result in overheating.
The operator has to make sure that the safety-relating and machine-technical installations are approved by
an expert before using them for the first time. The installations should be inspected every year by a skilled
person to be sure that safety is still optimal.
CAUTION EYE DAMAGE:
Always position the laser in a way that prevents the
audience from looking directly into the laser beams. The installation should assure that
the beam will not strike the audience.
HOW TO SET UP AND CONTROL THE UNIT
You can operate the unit in 4 ways:
1) MUSIC CONTROLLED MODE:
The unit runs a preprogrammed sequence to the rhythm of the music. Select this mode when only 1 unit is
used (standalone) or when the unit is placed as the first (master) unit in a chain with several units.
Press the
FUNC-button until the display shows: Sou (followed by a number from 0 to 6)
Please check carefully the Menu chart above.
Now use the UP or DOWN buttons to select one of the sound modes:
o
Sou0 = Laser + RGBWA + White Leds
o
Sou1 = Laser + RGBWA
o
Sou2 = Laser + White Leds
o
Sou3 = RGBWA + White Leds
o
Sou4 = RGBWA
o
Sou5 = Laser
