background image

ENGLISH 

 

OPERATION MANUAL 

 

 
JB SYSTEMS

®

 

2/8 

 HF-TWIN RECEIVER 

SAFETY INSTRUCTIONS: 

  To prevent fire or shock hazard, do not expose this appliance to rain or moisture.  

  To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when 

bringing  it  into  a  warm  room  after  transport.  Condense  sometimes  prevents  the  unit  from  working  at  full 
performance or may even cause damages. 

  This unit is for indoor use only.  

 

Don’t place metal objects or spill liquid inside the unit. No objects filled with liquids, such as vases, shall be 
placed  on  this  appliance.  Electric  shock  or  malfunction  may  result.  If  a  foreign  object  enters  the  unit,  im-
mediately disconnect the mains power. 

  No naked flame sources, such as lighted candles, should be placed on the appliance. 

 

Don’t cover any ventilation openings as this may result in overheating.  

  Prevent use in dusty environments and clean the unit regularly. 

  Keep the unit away from children. 

  Inexperienced persons should not operate this device. 

  Maximum save ambient temperature is 40

°C. Don’t use this unit at higher ambient temperatures. 

  Minimum distances around the apparatus for sufficient ventilation is 10cm.  

  Always unplug the unit when it is not used for a longer time or before you start servicing. 

  The electrical installation should be carried out by qualified personal only, according to the regulations for 

electrical and mechanical safety in your country. 

  Check that the available voltage is not higher than the one stated on the rear panel of the unit. 

  The socket inlet shall remain operable for disconnection from the mains. 

  The power cord should always be in perfect condition. Switch the unit immediately off when the power cord 

is squashed or damaged.  

  The socket inlet is used as the disconnect device, the disconnect device shall remain readily operable 

  This appliance must be earthed to in order comply with safety regulations. 

  In order to prevent electric shock, do not open the cover. There are no user serviceable parts inside. 

 

Never

 repair a fuse  or bypass the fuse holder. 

Always

 replace a damaged fuse  with a fuse of the same 

type and electrical specifications! 

  In the event of serious operating problems, stop using the appliance and contact your dealer immediately. 

  Please use the original packing when the device is to be transported. 

  Due to safety reasons it is prohibited to make unauthorized modifications to the unit. 

 

 
 

CAUTION

 

CAUTION:

  To  reduce  the  risk  of  electric  shock,  do  not  re-

move the top cover. No user-serviceable parts inside. Refer 
servicing to qualified service personnel only. 

 

The  lightning  flash  with  arrowhead  symbol  within  the  equilateral  triangle  is  intended  to  alert  the 
use or the presence of un-

insulated “dangerous voltage” within the product’s enclosure that may 

be of sufficient magnitude to constitute a risk of electric shock. 

 

The exclamation point within the equilateral triangle is intended to alert the user to the presence of 
important  operation  and  maintenance  (servicing)  instructions  in  the  literature  accompanying  this 
appliance. 

 

This symbol means: indoor use only

 

 

This symbol means: Read instructions 

 

This  symbol  means:  this  amplifier  is  capable  of  producing  very  high  sound  pressure  levels  that 
may  permanently  damage  your  ears.  Hearing  experts  strongly  advise  against  permanent  expo-
sure to high sound levels! 

Summary of Contents for HF-TWIN













Reviews: