ENGLISH
OPERATION MANUAL
JB SYSTEMS
®
3/5
CAM-SPOT 30TW
DESCRIPTION:
1. MAGNETIC FILTERHOLDER:
to hold different kinds of filters with a diameter of 7cm.
2.
Knob to fix hanging bracket in the desired position.
3. HANGING BRACKET:
used to hang the projector or to put it on a surface by means of the extra rotating
levers .
4. MAINS INPUT:
1m power cord with standard CEE 7/7 mains plug.
5. SAFETY EYE:
used to attach a safety cable when the unit is rigged, see paragraph “overhead rigging”.
6. COLOR TEMP:
used to change the color temperature from warm white (WW
– 3000K) to cold white
(CW
– 6000K)
7. MANUAL DIMMER:
used to dim the output manually.
8. BARN DOORS:
they facilitate shaping of the beam of light from the fixture, and prevent the distinctive
scatter of light created by the lens from spilling into areas where it is not wanted, such as the eyes of
audience members.
OVERHEAD RIGGING
Important:
The installation must be carried out by qualified service personal only. Improper
installation can result in serious injuries and/or damage to property. Overhead rigging requires
extensive experience! Working load limits should be respected, certified installation materials should
be used, the installed device should be inspected regularly for safety.
•
Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging
and servicing.
•
Locate the fixture in a well ventilated spot, far away from any flammable materials and/or liquids. The
fixture must be fixed
at least 50cm
from surrounding walls.
•
The device should be installed out of reach of people and outside areas where
persons may walk by or be seated.
•
Before rigging make sure that the installation area can hold a minimum point load of
10times the device’s weight.
•
Always use a certified safety cable that can hold 12times the weight of the device
when installing the unit. This secondary safety attachment should be installed in a way
that no part of the installation can drop more than 20cm if the main attachment fails.
•
The device should be well fixed; a free-swinging mounting is dangerous and may not be considered!
•
Don’t cover any ventilation openings as this may result in overheating.
•
The operator has to make sure that the safety-relating and machine-technical installations are approved by
an expert before using them for the first time. The installations should be inspected every year by a skilled
person to be sure that safety is still optimal.
