ENGLISH
USER MANUAL
JB SYSTEMS
®
2/7
ROTOGOBO ZOOM
SAFETY INSTRUCTIONS:
•
To protect the environment, please try to recycle the packing material as much as possible.
•
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
•
To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when bringing it
into a warm room after transport. Condense sometimes prevents the unit from working at full performance or may even
cause damages.
•
This unit is for indoor use only.
•
Don’t place metal objects or spill liquid inside the unit. Electric shock or malfunction may result. If a foreign object
enters the unit, immediately disconnect the mains power.
•
Locate the fixture in a well ventilated spot, away from any flammable materials and/or liquids. The fixture must be fixed
at least 50cm from surrounding walls.
•
Don’t cover any ventilation openings as this may result in overheating.
•
Prevent use in dusty environments and clean the unit regularly.
•
Keep the unit away from children.
•
Inexperienced persons should not operate this device.
•
Maximum safe ambient temperature is 40
°C. Don’t use this unit at higher ambient temperatures.
•
Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing.
•
Allow the device about 10 minutes to cool down before to start servicing.
•
Always unplug the unit when it is not used for a longer time or before to start servicing.
•
The electrical installation should be carried out by qualified personal only, according to the regulations for electrical
and mechanical safety in your country.
•
Check that the available voltage is not higher than the one stated on the unit.
•
The power cord should always be in perfect condition. Switch the unit immediately off when the power cord is
squashed or damaged. It must be replaced by the manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
•
Never let the power-cord come into contact with other cables!
•
This fixture must be earthed in order to comply with safety regulations.
•
Don’t connect the unit to any dimmer pack.
•
Always use an appropriate and certified safety cable when installing the unit.
•
In order to prevent electric shock, do not open the cover. There are no user serviceable parts inside.
•
Never
repair a fuse or bypass the fuse holder.
Always
replace a damaged fuse with a fuse of the same type and
electrical specifications!
•
In the event of serious operating problems, stop using the fixture and contact your dealer immediately.
•
The housing and the lenses must be replaced if they are visibly damaged.
•
Please use the original packing when the device is to be transported.
•
Due to safety reasons it is prohibited to make unauthorized modifications to the unit.
Important:
Never look directly into the light source!
CAUTION:
To reduce the risk of electric shock, do not remove the top
cover. No user-serviceable parts inside. Refer servicing to qualified
service personnel only.
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use or the
presence of un-insulated
“dangerous voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the presence of
important operation and maintenance (servicing) instructions in the literature accompanying this appliance.
This symbol means: indoor use only
This symbol means: Read instructions
This symbol determines: the minimum distance from lighted objects. The minimum distance between light-
output and the illuminated surface must be more than x meters
The device is not suitable for direct mounting on normally flammable surfaces. (suitable only for mounting
on non-combustible surfaces)
CAUTION:
Do not stare at operating lamp.
May be harmful to the eyes.
