ENGLISH
USER MANUAL
JB SYSTEMS®
6/15
ALIEN
HOW TO SET UP AND CONTROL THE UNIT
You can operate the unit in 4 ways:
1) MUSIC CONTROLLED MODE:
The unit runs a preprogrammed sequence to the rhythm of the music. Select this mode when only 1 unit is
used (standalone) or when the unit is placed as the first (master) unit in a chain with several units.
•
Press the
[MENU] button until the display shows: [Sou]
•
Now use the [UP] or [DOWN] to browse the different sound modes.
•
Press the [ENTER] button to select the desired sound mode:
o
[SouP] = Wash projector effects [SP 1] to [SP 6]
o
[Soub] = Led Beam effects [Sb 1] to [Sb10]
o
[SouL] = Laser effects [SL 1] to [SL 3]
o
[SouF] = White Flash effects [SF 1] to [SF10]
o
[SouM] = Mixed effect [SM 1] to [SM 8]
•
With the [UP] & [DOWN] buttons, you can choose different programs for the selected sound mode. (see
above)
•
Press the [ENTER] button to confirm your choice.
•
Put on some music and set the sensitivity of the microphone by using the sensitivity knob (7) so that the
effect reacts perfectly to the sound level of your music.
You can connect several units together: just put the first unit of the chain in one of the sound activated
effect modes and all other units in “Slave mode” (display shows “SLA”) to make them all work in perfect
sync!
Note:
When no music is detected, the output of the unit will be shut off (blackout).
2) FULL AUTOMATIC MODE:
The unit automatically runs a preprogrammed sequence. Select this mode when only 1 unit is used
(standalone) or when the unit is placed as the first (master) unit in a chain with several units.
•
Press the
[MENU] button until the display shows [Aut]
•
Now use the [UP] or [DOWN] to browse the different automatic modes.
•
Press the [ENTER] button to select the desired automatic mode:
o
[AutP] = Wash projector effects [AP 1] to [AP 8]
o
[Autb] = Led Beam effects [Ab 1] to [Ab10]
