9
InterTecho actuators
The commands have the following meaning:
•
Turn on
: Turns the actuators on. In case of dimmer actuators the dim
procedure can be started and stopped by this command.
•
Turn off
: Turns the actuator off.
•
Toggle
: Turns the actuator on and off alternating. So you can control a
switch actuator comfortable by a single button on the remote control only.
•
Rotate left/right
: These commands are for electric blinds. They turn on and
off the actuator for a short moment (ca. 160 ms), so that the blinds are
rotated by a small angle.
•
Dim to
: Is available for code learning actuators for dimming function only. A
percentage value for the brightness can be selected in the range of 0-100%
in steps of 6.25%. If the slider is moved the actuator will reflect the current
light level in real time, so you can directly check the result.
•
Select
: Selects the actuator for actions which are initiated later without
changing the state of the actuator.
Note
: The commands rotate left/right are allowed to be used only if the motor
supports short operation periods. Otherwise using these commands can cause
overload resulting in damage to the motor.
10
Pauses
Pauses in the range of 100 ms up to 25 seconds can be inserted into a light scene. It
is possible to add multiple pauses one after another to extend the total period of time.
Note:
During the execution of a pause no other light control signals are processed.
Editing a light scene
After one or multiple actuators have been added to a light scene it will show up in the
table like:
To move an actuator within a light scene just mark it with the left mouse button, keep
the button pressed and moved it to its new position. If you move the actuator along