Reset DMX values of a step:
To reset the DMX values of a step proceed as follows:
Press key "Menu" one time. Then press 5 times key "+" -
will be shown on the display.
Confirm by pressing key "Enter".
will be displayed.
Recall the desired step by means of the keys "+" and "-", confirm the selection
by pressing key "Enter".
Select function
by means of the keys "+" and "-".
After selecting the function press key "Enter".
will be displayed.
Confirm selection by pressing key "Enter" again.
The DMX values of the selected step will be set to zero.
STANDALONE STEPS
STEP NR. 1/X
RESET STEP
SURE?
Store cues from a DMX board:
Select the Standalone menu:
Press key "Menu" first and then press key "+" five times.
will be displayed.
Confirm selection by pressing key "Enter".
Then press key "+" one time to enter capture function.
will be
displayed.
Press "Enter" to enable the fixture to receive DMX data from a connected
DMX board. The display will show
To store data press
"Enter" again. The display will show:
To insert a new step press key "+". The display will show:
Press "Enter" to confirm and the display will show:
To continue programming press key "-" one time and find:
shown on the display.
Press "Enter" to enable fixture to receive DMX data, and see confirmation
on the display.
Repeat the process of storing data on the fixture by pressing "Enter" again.
(Press "Enter" first time:
; Press "Enter" second time:
To continue, insert a new step and repeat process.
STANDALONE STEPS
CAPT DMX 1/ 1
DMX CAPTURE.
CAPT DMX 1/1
SURE?
INSERT 2/2.
CAPT DMX 2/2
DMX CAPTURE
START CAPTURE
CAPT DMX X / X)
JB-lighting Lichtanlagentechnik GmbH Sallersteigweg 15 D-89134 Blaustein T49 (0)7304-9617-0
26
