JazzAmp Henriksen, Owner'S Manual, Page: 4 / 10

INPUT JACK
The JazzAmp has a ¼” / XLR combo input jack. This jack may be used to plug in
a standard ¼” instrument cable or an XLR cable. The XLR is unswitched 48-volt
phantom powered, refer to your device manufacturer for compatibility.
BLUETOOTH AUX IN
The Blu comes with a Bluetooth 4.0 auxiliary input, which you can connect to from
any Bluetooth enabled device.
5-BAND EQUALIZER
A little goes a long way, so start with all dials set to the 12:00 (neutral) position.
The EQ ranges from Low (100Hz) to High (1.6kHz), with a shelving Presence
control at 3.5kHz. Because of the amplifier’s small size, it is advisable to
experiment with positioning the amp as well as with the EQ. For example, the
best bass response will be achieved by setting the amp on the floor.
line out input
fx loop
ring: send
tip: return
volume reverb
100Hz 350Hz 760Hz
1.6kHz
3.5kHz
hi-mid
high
presence
off
on
low low-mid