![Jazz SOUND PLATFORM SP2.1 Owner'S Manual Download Page 5](http://html1.mh-extra.com/html/jazz/sound-platform-sp2-1/sound-platform-sp2-1_owners-manual_636275005.webp)
Congratulations and thank you for purchasing the JAZZ AUDIO SOUND PLATFORM Table-Top Surround Sound
System. The JAZZ AUDIO SOUND PLATFORM greatly enhances the sound quality of today’s flat screen LED, LCD
and Plasma TVs without having to add a lot of speakers. A single speaker system that requires very little space, the
SOUND PLATFORM can be installed below or in front of a high definition TV or inside a cabinet. You’ll enjoy simulated
surround sound from a single, space- saving cabinet with deep, enveloping bass without bulky speakers or amps. The
JAZZ AUDIO SOUND PLATFORM easily connects to inputs on today’s flat panel TVs and digital music players and
even syncs to almost any Bluetooth audio device.
JAZZ AUDIO
SOUND PLATFORM
FRONT PANEL
1. STATUS LED -
(Behind front panel lens.) One multi-color LED. This LED will illuminate red/blue and flash in
different modes to indicate changes in the SOUND PLATFORM operational status. SOLID RED - OFF (Standby).
Power cord is connected and AC switch is turned ON, but the SOUND PLATFORM is OFF.
SOLID BLUE – ON –
JAZZ AUDIO SOUND PLATFORM is ON.
SINGLE BLUE FLASH -
Confirms receiving an IR command from the JAZZ AUDIO SOUND PLATFORM
Remote for changes to Treble/Bass, EQ Reset, Simulated Surround (SR), single Volume UP/DOWN
command, initiating output of the Bluetooth Connection Code.
RAPID BLUE FLASH -
Confirms receiving a continuous IR stream from the SOUND PLATFORM
Remote for ramping volume UP/DOWN. Rapid blue flash also indicates the SOUND PLATFORM is in
Bluetooth pairing mode.
SLOW BLUE FLASH -
Audio Mute. Audio signal to the speakers is turned OFF.
TWO BLUE FLASHES; DELAY -
Bluetooth input is selected and no Bluetooth device is connected or it is
out of range.
2. IR SENSOR -
(Behind front panel lens.) The IR Sensor ‘sees’ the IR control commands output from the
SOUND PLATFORM IR Remote Control when buttons are pressed on the remote for armchair control of the
SOUND PLATFORM. This sensor must be unobstructed for direct line-of-sight to the remote, or the remote will
not be able to control the SOUND PLATFORM.
Back Panel Connection Plate
JAZZ AUDIO
SOUND PLATFORM
REAR PANEL
3. FRONT AND REAR PANEL BASS PORTS -
Two pairs of tuned openings in the SOUND PLATFORM cabinet
allow air to ‘release’ from the cabinet and enhance low frequency audio. Allow at least 3 inches of clearance to a
back wall to allow air to move freely from the ports for full bass extension.
3
3