8
2.4 Sleep mode (automatic energy-saving)
The camera goes into sleep mode automatically after 30 seconds of inactivity
if it is not linked to a computer via the USB cable.
You can manually go into sleep mode by pressing the MODE button until "off"
is shown on the LCD screen. Then press the shutter button to validate your
choice. A beep confirms your choice. In sleep mode energy consumption is
very low and the battery life is prolonged. Your camera can remain in sleep
mode for up to 100 hours. To use your camera again simply press the MODE
button.
2.5 Self-Timer mode
Press the MODE button until the LCD screen displays the icon of "Self-timer"
mode. Press the shutter button and the camera counts down for 10 seconds
then gives off a beep and the LED light blinks every second. Then the
camera takes a photo.
2.6 AVI mode
Press the MODE button until the LCD display shows <AVI Capture>.
Press the shutter button, and the camera will continuously capture for about 6
frames per second until you release the button.
2.7 Continuous shooting
Press the MODE button until the LCD screen displays the "continuous
shooting" mode. Press the shutter button and the camera takes three
consecutive photos. The number on the LCD screen goes down accordingly.
2.8 Deleting all the photos saved to memory
Press the MODE button until the LCD screen displays the icon of the "delete
all photos" mode and then press the shutter button twice to validate your
choice. All the photos stored in the camera will be deleted and the previously
Summary of Contents for JDC9
Page 1: ...JDC9 USER S MANUAL ...
