Jazz Speakers J-9940, Operating Instructions, Page: 3 / 5

3
Product Specifications
1. Subwoofer (Wooden)
Output Power (R.M.S.) : 100 W
Driver : 8" Woofer
Load Impedance : 6 Ohms
Magnetically Shield : Not necessary
Fuse : AC 250V/3.15A (Local Voltage:220~240V)
AC 125V/5A (Local Voltage:100~120V)
AC IN : AC transfermer built-in.
2. Satellite
Output Power (R.M.S.) : 20W x 5
Driver : Front SPK. (Wooden) 3" full range x 2 + 1" dome tweeter
Rear SPK. (Plastic) 3" full range + 1" dome tweeter
Center SPK. (Plastic) 3" full range + 1.5" dome tweeter
Load Impedance : 8 Ohms
Magnetically Shield : YES
3. Total Power (R.M.S.) : 200 W
4. Frequency Response : 30 Hz ~ 20 kHz
5. Dimension (W x H x D) : Subwoofer - 330 x 410 x 330 mm
Front - 130 x 1100 x 87 mm
Rear - 130 x 230 x 110 mm
Center - 330 x 95 x 200 mm
6. Center Speaker :
POWER : Power source from Subwoofer 9 pin DIN cable
Operation Environment : 0 ~ 40
7. Remote control :
Battery :
(DC 1.5V AAA x 2)
Dimension (W x H x D) : 60 x 15 x 160 mm
Package Contents
* Center Speaker with control Box , Subwoofer, Satellite Speakers x 4
* RCA to RCA Stereo Signal Cable x 3
* RCA Signal Cable (3M) x 3
* RCA to Bare wire Signal Cable (3M) x 2
* RCA Extension cable (6M) x 2
* 9 Pin Din Cable x 1
* Wall Mounting kit
* Remote Control
* Battery (DC 1.5V AAA x 2)
* User Manual
Optional Accessories
* F-500(A) Speaker stand
Telescopic floor stand for rear speaker (Cast metal base)
Notice
1.Avoid exposing speakers to environments that are excessively warm and humid
(particularly in unventilated spaces or nearby heaters) or dusty.
2.Do not set speakers near windows exposed to direct sunlight or in areas prone to
water seepage.
3.Avoid excessive vibration of speakers.
4.Clean speaker housing by wiping with mild cleaning solution. Do not use solvents!
5.The speakers incorporate an efficient anti-magnetic architecture, permitting use in
close proximity to most television screens.If the use of your speakers cause
distortions in your television screen colors, try the following:
Turn off and unplug your television, turn on the speaker(s).After waiting 15 to 30
minutes, turn the television on and increase the distance between screen and
speakers until distortion disappears. Also, note whether other magnetic emission
sources are in the immediate vicinity. If so, relocate so as to prevent screen
distortion.
6. "!" WARNING : Before connecting or disconnecting any cables, make sure that
the speaker's power button is in the " OFF " position and the power adapter is
unplugged from the power source and not receiving power.
7.
Manufactured under license from Dolby Laboratories. " Dolby " , "Pro Logic " and
the double-D symbol are trademarks of Dolby Laboratories.
All other brand and product names are trademarks or registered trademarks of
their respective holders.
8.All specifications subject to change without prior notice.
9.
To return all adjustment settings to the factory defaults, turn off the main system
power and unplug the DC power adapter. After 10 seconds, plug in the DC adapter.
Default Settings
REAR
LEFT SPEAKER
REAR
RIGHT SPEAKER
FRONT
LEFT SPEAKER
FRONT
RIGHT SPEAKER
CENTER
SPEAKER
COMPUTER & AUDIO
DVD PLAYER
Fig(1)
SUBWOOFER
CONTROL BOX
REAR
LEFT SPEAKER
REAR
RIGHT SPEAKER
FRONT
LEFT SPEAKER
FRONT
RIGHT SPEAKER
CENTER
SPEAKER
COMPUTER & AUDIO
DVD PLAYER
Fig(1)
SUBWOOFER
CONTROL BOX
4