Remote Control Functions
12. POWER
17. VOLUME (+/-)
3. 5.1 CH
2. Pro Logic
1. Stereo
13. Mute
5. Line
4. Optical
14. Coaxical
7. C_delay
6. S_delay
15. Dynamic
9. SPCFG
8. Mode
16. Status
11. Test
10. Trim
1. Stereo :
Manual selection of stereo 2-channel audio mode.
2. Pro Logic :
Manual selection of Dolby Pro Logic audio mode.
3. 5.1 Ch :
Manual selection of Dolby Digital
audio mode.
4. Optical :
Manual selection of optical input mode.
5. Line :
Manual selection of line input mode.
6. S_Delay :
Surround speaker's audio delay when in the Dolby Digital or Dolby Pro
Logic audio modes. Choices are
: 0 ms, 5 ms, 10 ms, 15 ms (default
: 0 ms).
7. C_Delay :
Center speaker audio delay when in the Dolby Digital or Dolby Pro
Logic audio modes. 0-5 ms delay (default : 0 ms)
8. Mode :
Selection of audio type. Choices are Dolby Digital, Dolby Pro Logic, or
Stereo
9. SPCFG :
For Dolby Digital and Dolby Pro Logic audio modes only. Distributes
low-bass frequencies, usually reproduced by the subwoofer, to the front, center
and surround speakers. Press the SPCFG button and adjust the levels using the
/- buttons.
10. Trim :
Same as "Test" but uses your audio input signal rather than a test signal.
Adjust each speaker's volume level using the /- buttons.
11. Test :
Auto test individual speaker volume adjustment when in Dolby Digital or
Dolby Pro Logic modes. Press and hold the test button for 2 seconds. As the test
signal travels from channel-to-channel, adjust each speakers volume level using
the /- buttons.
12. Power :
Turns system power on/off.
13. Mute :
Mutes/Restores systems volume.
14. Coaxial :
Manual selection of coaxial input mode.
15. Dynamic :
Dynamic range adjustment between the loudest and softest sounds
being reproduced. Choices are
: 0%, 25%, 50%, 75% (default
: 0%).
16. Status :
Displays audio mode status.
17. Volume (+/-) :
Raises or lowers the systems volume level.
1-1. Subwoofer :
Output power(R.M.S.) :
20 W
Driver :
5.25" Woofer
Load Impedance
4 Ohms
Magnetically Shield :
NO
1-2
.
Satellite :
Output power(R.M.S.) :
5 W x 5
Driver :
Full Range 2.5"
x 5
Load Impedance :
4 Ohms
Magnetically Shield :
Yes
2. Total Power (R.M.S.) :
45 W
3. Frequency Response :
60 Hz
~
20kHz
4. Dimension (W x H x D) :
Subwoofer
:
170 x 300 x 285 mm
Satellite : 87 x 96 x 95 mm
5.
Operation environment :
0 ~ 40
6
Decoder Box :
POWER Adapter :
Input AC adapter, Output
: DC IN 12V/0.8A
Dimension (W x H x D) :
W 75 mm x H 180 mm x D 230 mm
. Remote control :
Battery :
DC 1.5V "AAA" x 2
Dimension (W x H x D) :
60 x 15 x 160 mm
Specification
1. Subwoofer Speaker x 1
2. Dolby digital decoder x 1
3. Satellite speakers x 5
4. Remote controller x 1
5. M
for surround speaker x 2
6. Extension line for surround speaker x 2
7. Optical line (1M, include MINIJACK converter) x 1
8. Mini DIN cable (1.8M) x 1
9. DC connection line (1.8M) x 1
10. MiniJACK signal line (1M) x 1
11. Battery (AAA size) x 2
12. Operating Instruction Manual
ounting kits
Package Contents
3
4
